Waterfall Twists into Mermaid Braid | Cute Hairstyles
May 12, 2013
Feel free to follow CGH on Instagram to see behind-the-scenes photos of our hairstyles and family!
Many fans have emailed or tagged me in photos from Pinterest and Instagram asking me to film a mermaid braid tutorial.
To be honest, I haven’t loved the style enough to film one because I didn’t particularly like how the strands pulled into the braid from the front and sides.
Thinking about it for some weeks now, it hit me that we should create a hairstyle combination using the Waterfall Twists as a base for the style… and then use the falling strands of those twists as the “add-ins” for the Mermaid Braid!
If you love this photo, please feel free to pin it!
When I tried it out, as soon as I released the braid… it nearly took my breath away! We L-O-V-E-D it!!!
CGH#3 wanted to be my model knowing that today is Mother’s Day, and she asked to do the video introduction as well! Isn’t she adorable???
If you love this photo, please feel free to pin it!
Items Needed: Brush, rat-tail comb, spray bottle, 1 small hair elastic, hairspray, and accessory {if desired}.
Time Requirement: 8-10 minutes
Skill Level: Hard
Step-by-Step Instructions:
- Begin by brushing hair, and making a center part right down the head…
- Complete a waterfall twist on both sides of the head, beginning near the temples and ending at the back of the head…
- Take the ends of both twists {you should have 4 strands total} and create three strands from them {I do this by joining together two strands, one from each side, to create one strand}…
- Now begin a simple braid….
- After one complete stitch, pick up the nearest waterfall strand {the hair running through the twist} on the left side of the head and add it into your left-most braid strand…
- Now pick up the nearest waterfall strand on the right side of the head and add it into your right-most braid strand…
- Next, complete a regular braid stitch without adding in any hair {this will space out the stranding and create the mermaid braid look}..
- Repeat Steps 5-7 by adding in the waterfall strands until you run out…
- After all waterfall strands are included, finish the rest of the hair off into the simple braid…
- Secure with a hair elastic…
- Add any accessory or ribbon as desired.
Enjoy!
Please feel free to leave a comment below and let us know what you think, and as always… feel free to share!
Happy Hairdoing!
* Note from Mindy: Google Reader will be shutting down on July 1st, so if you want to follow our blog… you can do so at BlogLovin, a new easy-to-use blog reader for women!
Tinker Bell Hair Bun | Disney Hairstyles
May 01, 2013
Tinker Bell has to be one of the most-beloved Disney Characters in my household! CGH #4 particularly loves Tinker Bell, and we have collected all of her movies over the years!
When Disney asked me to create this hairstyle tutorial, I was super thrilled at the prospect of being inspired by Tinker Bell’s adorable fairy bun!
Please note that the 2D photos of Tinker Bell in the past have her wearing a teal blue ribbon at the base of the bun, which is what I show you here. {The ribbon is replaced by green vines in the more recent 3D images.}
As we planned this hairstyle, I really needed some blonde hair to make the tutorial just right! Nope, no blonde hair anywhere in our home! Luckily for me… one of my best friends was willing to lend me her five-year old daughter, who was tickled pink to help me out!
Be sure to stay to the end of the video, because there is a really cute clip there that you will not want to miss!
Items Needed: Brush, rat-tail comb, spray bottle, 1 bun maker {matching hair color}, 2-3 bobby pins, 2 hair elastics, hairspray {if desired}, and blue sheer ribbon.
Time Requirement: 2-3 minutes
Skill Level: Easy
Step-by-Step Instructions:
- Begin by brushing the hair, and combing all the hair into a high ponytail {remember, this is a high bun, so be sure that the ponytail is on the top of the head}…
- Secure the ponytail with a rubber band…
- Slide the ponytail through the middle of the bun maker, or hair doughnut…
- Let the hair fall evenly around the bun maker {try to get hair evenly placed so that the bun maker is not visible at all}…
- Using another hair band, slide it over the bun maker and release it at the base to create the perfect looking bun {you should have the ends of the hair still sticking out of the base}…
- Now, pick up a small strand of the ends of the hair near the front, and begin to twist them…
- As you work your way around, add in hair as you go {this will create a cute twist all the way around the base of the bun}…
- When you run out of hair, secure the ends at the base with a couple of bobby pins, and tuck in any loose ends…
- Lastly, wrap your ribbon around the front base of the bun, and tie it into a cute fairy bow in the back.
This hairstyle is perfect for fairy birthday parties, Halloween, ballet, and dance. Since it is a bun, you can use it for any number of occasions like family parties, recitals, etc.
Heavens, I’ll wear it too!
Enjoy your adorable Tinker Bell Bun!
If you liked this, you may very well love our other Disney Tutorials!
Please feel free to leave a comment below and let us know what you think, and as always… feel free to share!
Happy Hairdoing!
* Note from Mindy: Google Reader will be shutting down on July 1st, so if you want to follow our blog… you can do so at BlogLovin, a new easy-to-use blog reader for women!
Comment on this post »Double Braid Sparkly Headband | Braided Headbands
March 31, 2013
We wanted to do a hairstyle this week that would be different than all of the other braided headbands you see out there.
This one promises to get lots of attention because of how simple it is, yet it can be accented with thin sparkly headbands that you can find inexpensively at Walmart, Target, or Claire’s, etc.
This style is perfect for girls of all ages, and would be particularly beautiful as an accent to an updo for Prom, Homecoming, or any other formal occasion!
This hairstyle incorporates two thin braids, on either side of the head, which are then brought up over the head and pinned down just below the opposite ear.
Then the sparkly plastic headbands are placed in to accent the braids to your liking. {I pancaked the front braid just a bit to add a contrast to the braids themselves, which ended up being a very good touch!}
Items Needed: Curling wand, brush, rat-tail comb, 2 small hair elastics, 4 bobby pins, hairspray {if desired}, and two thin sparkly headbands.
Time Requirement: 5 minutes
Skill Level: Easy
Step-by-Step Instructions:
- Begin by brushing out the hair, and curling with your favorite curling tool {I used a 25 mm NuMe curling wand} or overnight no-heat method…
- Hairspray the curls when you are done curling, and leave them alone for a few minutes to let cool and set…
- {Optional} Tease the top of the hair a little, from the crown down the back, to add mega-volume…
- Pick up a section of hair near the ear and begin to braid it over the head {make sure to braid in the direction you want the braid to lie, which is up and over… otherwise, the braid will lay funny when you are done}…
- When braid is finished, secure with a hair elastic.
- Repeat Steps 4 & 5 on the other side of the head.
- Now, finger comb through the curls and smooth the top of the hair lightly with a brush, as needed…
- Bring each braid over the top of the head, and secure behind opposite ears with bobby pins {two crossed bobby pins works great}…
- {Optional} You can tug on the edges of the braids, like I did to the front braid, in order to pancake them. It adds a subtle differentiation to the style. I left the back braid alone.
- Now, place one sparkly headband in front of the first braid, and place the second headband between the first and second braids…
- Adjust the braids and headbands, as desired.
- Finish off with hairspray {if needed}.
Please feel free to leave a comment below and let us know what you think! If you enjoyed this hairstyle, please feel free to share it!
Happy Hairdoing!
* Note from Mindy: Google Reader will be shutting down on July 1st, so if you want to follow our blog… please don’t forget to follow us on BlogLovin, a new easy-to-use blog reader for women!
Comment on this post »Teased High Bun | Cute Updo Hairstyles
February 14, 2013
I want to introduce you to a very good friend of mine, Anne from AnneOrShine on YouTube! We met Anne at VidCon in 2012 and we have seen each other many times since.
Here at CGH, I have promised to bring you the treasures we find on YouTube, and Anne is definitely one of them! She specializes in DIY crafting and fashion, specifically in recycling and repurposing items around your home! Must… SUBSCRIBE… to her… now!!!
For the hairstyle in this collaboration, I have been seeing the Teased Bun everywhere and bet that you are too! From the Red Carpet… to catwalks… the teased bun is hot, Hot, HOT!
{Not to be mistaken with the ballet bun, the teased bun has much more volume and more of a tousled, effortless look!}
After our hairstyle video, there is a link to Anne’s channel where we both show you how to incorporate the hair accessories {bows and hair jewelry} we made using old ties and broken necklaces! {You can also see her video from the collab here!}
What I love about Anne’s accessories, along with our hairstyle, is that you can wear the bow all day and then later switch it out for the hair jewelry strands for a more formal/fancy look for a night on the town!
Enjoy!
Items Needed: Brush, rat-tail comb, spray bottle, 1 large hairband, 4-6 bobby pins, hairspray and hair bow or jewelry {if desired}.
Time Requirement: 5-8 minutes
Skill Level: Easy
Step-by-Step Instructions:
- Begin by brushing your hair and pulling it into a high ponytail {You may find it easier to tip your head upside down when creating the ponytail. This will ensure that you get the HIGH ponytail look, instead of a ponytail on the back of your head}…
- Once you have created the high ponytail, secure it hair with a hair band {I wanted a very soft and messy look, so I intentionally left the hair loose and even allowed some to stay out of the ponytail}…
- Take either a comb or a teasing brush and begin teasing the hair of the ponytail a little at a time {I usually divide the ponytail into 4-5 sections to ensure all the hair is teased. The teasing usually just brushes out when you are done.}
- When the ponytail is teased {a good sign is when the hair can almost stand by itself at the base}, then use the teaser brush to smooth down the top hair of the ponytail leaving the teased volume underneath…
- Next, twist the hair very slightly and begin to wrap the hair around the elastic to create a bun. {I did this in a clockwise direction, but feel free do it in a counter-clockwise direction if you wish}…
- When the bun is positioned the way you want it, use bobby pins to pin the rest of the hair into place….
- Add any accessory you desire {such as the DIY cute hair jewelry or hair bow that Anne showed us how to make}.
Enjoy!
If you liked this hairstyle, please do feel free to share! Happy Hairdoing!
* Note from Mindy: Don’t forget to follow us on BlogLovin, a new easy-to-use blog reader!
Comment on this post »